Ankündigung

Einklappen
Keine Ankündigung bisher.

Office Master Gate und Hipath 3800

Einklappen
Dieses Thema ist geschlossen.
X
X
Einklappen
 
  • Seite von 1
  • Filter
  • Zeit
  • Anzeigen
Alles löschen
neue Beiträge
Vorherige template Weiter
    #1

    Office Master Gate und Hipath 3800

    Hallo zusammen,

    wir haben unser OfficeMaster Gate an einer internen S0 Schnittstelle der Hipath 3800 hängen. Damit wir überhaupt einen "ISDN-Link" im Schnittstellenstatus bekommen haben, mussten wir erstmal ein Kabel kreuzen, das heißt die Adern 3-4 und 5-6 tauschen. Nun sagt die OfficeMaster Box im Schnittstellenstatus aber, dass unser S0 Port verbunden ist. Nur bekomme ich immer noch keine Anrufe an die Box übermittelt.

    Was für ein Protokoll erwartet die Box? Ich habe in der "Hipath SO: Fax-Server DSS1/QSIG" eingestellt und in der Box QSIG ebenfalls aktiviert.

    Was kann ich tun?
    Stichworte: -
    #2
    Syslog File

    Ich habe mal wie in der ANleitung hier im Forum beschrieben ein Syslog File erstellt. Leider bewirkt ein Anruf auf einer entsprechenden Durchwahl keine Einträge im Log. Für mich sieht das so aus als würde die TK-Anlage die Anrufe gar nicht an die BOx routen, oder?

    -----------------------------SYSLOG-----------------------
    Jul 26 17:44:20 OMG800773 kernel: imklog 4.2.0, log source = /proc/kmsg started.
    Jul 26 17:44:20 OMG800773 rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="1106" x-info="http://www.rsyslog.com"] (re)start
    Jul 26 17:44:20 OMG800773 rsyslogd: rsyslogd's groupid changed to 103
    Jul 26 17:44:20 OMG800773 rsyslogd: rsyslogd's userid changed to 101
    Jul 26 17:44:20 OMG800773 avahi-daemon[787]: Files changed, reloading.
    Jul 26 17:44:20 OMG800773 avahi-daemon[787]: Files changed, reloading.
    Jul 26 17:44:20 OMG800773 avahi-daemon[787]: Service group file /etc/avahi/services/omg.service changed, reloading.
    Jul 26 17:44:20 OMG800773 avahi-daemon[787]: Files changed, reloading.
    Jul 26 17:44:20 OMG800773 callp: Init:0 Hello from Lua 5.0.2 on Tue Jul 26 17:44:20 2011
    Jul 26 17:44:20 OMG800773 callp: Init:0 received msg from: Main:0, to: Init:0, delay: 0, data:
    Jul 26 17:44:20 OMG800773 callp: /usr/fb/bin/sipisdn/callp#015
    Jul 26 17:44:20 OMG800773 dhclient: bound to 192.168.21.200 -- renewal in 11782 seconds.
    Jul 26 17:44:20 OMG800773 callp: mux_callstatus:0 (1) dbg=9
    Jul 26 17:44:20 OMG800773 callp: mux_callstatus:0 (1) started.
    Jul 26 17:44:20 OMG800773 callp: mux_callstatus:0 (1) Trying to open server port 3214 for 'mux_callstatus:0'
    Jul 26 17:44:20 OMG800773 callp: mux_callstatus:0 (1) msg.from='netControl:0' code='103' handle='0' addr='t|0.0.0.0|3214' text='binding successful'
    Jul 26 17:44:20 OMG800773 callp: mux_callstatus:0 (1) listen on 3214
    Jul 26 17:44:20 OMG800773 callp: mux_jobcontrol:0 (1) dbg=1
    Jul 26 17:44:20 OMG800773 callp: mux_jobcontrol:0 (1) started.
    Jul 26 17:44:20 OMG800773 ntpd[986]: ntpd exiting on signal 15
    Jul 26 17:44:20 OMG800773 callp: mux_jobcontrol:0 (1) maxDChannels=4
    Jul 26 17:44:20 OMG800773 sshd[1183]: Server listening on 0.0.0.0 port 22.
    Jul 26 17:44:20 OMG800773 sshd[1183]: Server listening on :: port 22.
    Jul 26 17:44:20 OMG800773 callp: mux_jobcontrol:0 (1) a) v.bool_CfgValid=true and offset=1
    Jul 26 17:44:20 OMG800773 callp: mux_jobcontrol:0 (1) a) register task=mux_jobcontrol:1
    Jul 26 17:44:20 OMG800773 callp: mux_jobcontrol:0 (1) Trying to open server port 3217 for 'mux_jobcontrol:1'
    Jul 26 17:44:20 OMG800773 callp: mux_jobcontrol:0 (1) msg.from='netControl:0' code='103' handle='1' addr='t|0.0.0.0|3217' text='binding successful'
    Jul 26 17:44:20 OMG800773 callp: mux_jobcontrol:0 (1) listen on 3217
    Jul 26 17:44:20 OMG800773 callp: mux_jobcontrol:0 (1) a) v.bool_CfgValid=NIL and offset=2
    Jul 26 17:44:20 OMG800773 callp: mux_jobcontrol:0 (1) a) register task=mux_jobcontrol:2
    <173>Jul 26 17:44:20 OMG800773 callp: mux_jobcontrol:0 (1) Trying to open server port 3218 for 'mux_jobcontrol:2'
    Jul 26 17:44:20 OMG800773 callp: mux_jobcontrol:0 (1) msg.from='netControl:0' code='103' handle='2' addr='t|0.0.0.0|3218' text='binding successful'
    Jul 26 17:44:20 OMG800773 callp: mux_jobcontrol:0 (1) listen on 3218
    Jul 26 17:44:20 OMG800773 callp: mux_jobcontrol:0 (1) a) v.bool_CfgValid=NIL and offset=3
    Jul 26 17:44:20 OMG800773 callp: mux_jobcontrol:0 (1) a) register task=mux_jobcontrol:3
    Jul 26 17:44:20 OMG800773 callp: mux_jobcontrol:0 (1) Trying to open server port 3219 for 'mux_jobcontrol:3'
    Jul 26 17:44:20 OMG800773 callp: mux_jobcontrol:0 (1) msg.from='netControl:0' code='103' handle='3' addr='t|0.0.0.0|3219' text='binding successful'
    Jul 26 17:44:20 OMG800773 callp: mux_jobcontrol:0 (1) listen on 3219
    Jul 26 17:44:20 OMG800773 callp: mux_jobcontrol:0 (1) a) v.bool_CfgValid=NIL and offset=4
    Jul 26 17:44:20 OMG800773 callp: mux_jobcontrol:0 (1) a) register task=mux_jobcontrol:4
    Jul 26 17:44:20 OMG800773 callp: mux_jobcontrol:0 (1) Trying to open server port 3220 for 'mux_jobcontrol:4'
    Jul 26 17:44:20 OMG800773 callp: mux_jobcontrol:0 (1) msg.from='netControl:0' code='103' handle='4' addr='t|0.0.0.0|3220' text='binding successful'
    Jul 26 17:44:20 OMG800773 callp: mux_jobcontrol:0 (1) listen on 3220
    Jul 26 17:44:21 OMG800773 ntpdate[1200]: step time server 192.168.21.5 offset 0.866811 sec
    Jul 26 17:44:21 OMG800773 avahi-daemon[787]: Service "OMG800773" (/etc/avahi/services/omg.service) successfully established.
    Jul 26 17:44:21 OMG800773 wdhole[867]: Watchdog is now active
    Jul 26 17:44:21 OMG800773 wds[866]: Watchdog is now active, time out set to 30 seconds
    Jul 26 17:44:21 OMG800773 wds[864]: Watchdog is now active, time out set to 30 seconds
    Jul 26 17:44:21 OMG800773 ntpd[1232]: ntpd 4.2.4p8@1.1612-o Tue Apr 19 07:08:29 UTC 2011 (1)
    Jul 26 17:44:21 OMG800773 ntpd[1233]: precision = 11.000 usec
    Jul 26 17:44:21 OMG800773 ntpd[1233]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
    Jul 26 17:44:21 OMG800773 ntpd[1233]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
    Jul 26 17:44:21 OMG800773 ntpd[1233]: Listening on interface #1 wildcard, ::#123 Disabled
    Jul 26 17:44:21 OMG800773 ntpd[1233]: Listening on interface #2 lo, 127.0.0.1#123 Enabled
    Jul 26 17:44:22 OMG800773 ntpd[1233]: Listening on interface #3 eth0, 192.168.21.200#123 Enabled
    Jul 26 17:44:22 OMG800773 ntpd[1233]: Listening on interface #4 lo, ::1#123 Enabled
    Jul 26 17:44:22 OMG800773 ntpd[1233]: Listening on interface #5 eth0, fe80::213:95ff:fe07:62d9#123 Enabled
    Jul 26 17:44:22 OMG800773 ntpd[1233]: kernel time sync status 2040
    Jul 26 17:44:22 OMG800773 ntpd[1233]: frequency initialized 0.000 PPM from /var/lib/ntp/ntp.drift
    Jul 26 17:44:22 OMG800773 sshd[1224]: Did not receive identification string from 192.168.21.105
    Jul 26 17:44:22 OMG800773 callp: mux_options:0 (1) dbg=0
    Jul 26 17:44:22 OMG800773 callp: mux_isdn:0 (1) dbg=1
    Jul 26 17:44:22 OMG800773 callp: mux_isdn:0 (1) started.
    Jul 26 17:44:22 OMG800773 callp: mux_isdn:0 (1) ilidType 'S0' csi '0'
    Jul 26 17:44:22 OMG800773 callp: mux_sip:0 (1) dbg=1
    Jul 26 17:44:22 OMG800773 callp: mux_sip:0 (1) This is the sip muxer running as mux_sip:0.
    Jul 26 17:44:22 OMG800773 callp: mux_isdn:0 (1) additonal par for channel 0 is: ''
    Jul 26 17:44:22 OMG800773 callp: mux_isdn:0 (1) Executing 'irun 1 /usr/fb/bin/isdn.prc --slot=1 --slot-index=a --configuration-index=1 --l2-protocol=pp --l3-protocol=qsig --max-b-channels=2 --CallingPartyNumberInternationalPrefix="" --CallingPartyNumberNationalPrefix="" --CallingPartyNumberSubscriberPrefix="" --PrefixAlsoOnCpn=0 --OutboundTypeOfNumber="1" --OutboundNumberingPlan="2" --debug-l1=0 --debug-l2=1 --debug-l3=1 --debug-l4=0 --country=49 --device=/dev/ilid --app-pipe-ascii --read-fd=0 --write-fd=1 '
    Jul 26 17:44:22 OMG800773 callp: mux_isdn:0 (1) ilidType 'S0' csi '1'
    Jul 26 17:44:22 OMG800773 callp: mux_isdn:0 (1) ilidType 'S0' csi '2'
    Jul 26 17:44:22 OMG800773 callp: mux_isdn:0 (1) ilidType 'S0' csi '3'
    Jul 26 17:44:22 OMG800773 kernel: [ 43.685511] HFC4S8S: Layer 1 status change (0x01)
    Jul 26 17:44:22 OMG800773 kernel: [ 43.685546] HFC4S8S: switch HFC1.0 TERMINATION resitor off.
    Jul 26 17:44:22 OMG800773 kernel: [ 43.686921] HFC4S8S: Layer 1 status change (0x01)
    Jul 26 17:44:22 OMG800773 kernel: [ 43.686948] ILID: layer 1 state change for 1.a/D/S0/HFC-4S (1)!
    Jul 26 17:44:22 OMG800773 kernel: [ 43.686985] ILID: layer 1 state change for 1.a/E/S0/HFC-4S (1)!
    Jul 26 17:44:22 OMG800773 callp: mux_isdn:0 (1) data='SETINFO|i386|0|0.0|2'
    Jul 26 17:44:22 OMG800773 callp: mux_isdn:0 (1) identifier='1' pid='1239'
    Jul 26 17:44:22 OMG800773 callp: mux_isdn:0 (1) ISDN process state changed PROCESS100
    Jul 26 17:44:22 OMG800773 callp: mux_jobcontrol:1 (1) handle netData Msg: msg.from='netControl:0' msg.to='mux_jobcontrol:1' code='100' handle='7' addr='t|192.168.21.105|64227' text=''
    Jul 26 17:44:22 OMG800773 callp: mux_jobcontrol:1 (1) connection established
    Jul 26 17:44:23 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): ISDN: d-channel found '1.a/D/S0/HFC-4S'
    Jul 26 17:44:23 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): ISDN: b-channel found '1.a/B2/S0/HFC-4S'
    Jul 26 17:44:23 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): ISDN: b-channel found '1.a/B1/S0/HFC-4S'
    Jul 26 17:44:23 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): L2M: Init stage 1
    Jul 26 17:44:23 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): non automatic TEI assignment: true
    Jul 26 17:44:23 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): layer 1 task index: 2
    Jul 26 17:44:23 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): data link multiplexer task index: 6
    Jul 26 17:44:23 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): boot on layer 2 down no
    Jul 26 17:44:23 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): mode user mode
    Jul 26 17:44:23 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): DSS1M: Init
    Jul 26 17:44:23 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): B channels: 2
    Jul 26 17:44:23 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): interface type: S0
    Jul 26 17:44:23 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): callref coding rule: other interface
    Jul 26 17:44:23 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): CHI coding rule: S2M (E1)
    Jul 26 17:44:23 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): bchannel map: 111111111111111111111111111111
    Jul 26 17:44:23 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): L2M : 17:44:22,150 auto activate L2
    Jul 26 17:44:23 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): L2X : 2011-07-26 17:44.22,156 T:00 01 7f
    Jul 26 17:44:23 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): L2X : 2011-07-26 17:44.22,170 R:00 01 73
    Jul 26 17:44:23 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): L2X : 2011-07-26 17:44.22,688 R:02 01 7f
    Jul 26 17:44:23 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): L2X : 2011-07-26 17:44.22,688 T:02 01 73
    Jul 26 17:44:23 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): L2M : 17:44:22,689 error indication F
    Jul 26 17:44:23 OMG800773 callp: mux_jobcontrol:1 (1) handle ':sh' arg = 'date 072617442011.22'
    Jul 26 17:44:23 OMG800773 callp: mux_jobcontrol:1 (1) arglist is: log_level=1
    Jul 26 17:44:23 OMG800773 callp: receive_mask=
    Jul 26 17:44:23 OMG800773 callp: bchan_param=
    Jul 26 17:44:23 OMG800773 callp: calling_party_number=
    Jul 26 17:44:23 OMG800773 callp: dchan_param= --l2-protocol=pp --l3-protocol=qsig --dial-mode=block --debug-l1=1 --debug-l2=1 --debug-l3=1 --debug-l4=0 --base-number= --ddi-length=3333333333
    Jul 26 17:44:23 OMG800773 callp: mux_jobcontrol:1 (1) command is 'c'
    Jul 26 17:44:23 OMG800773 callp: mux_jobcontrol:1 (1) Set dchan_param ' --l2-protocol=pp --l3-protocol=qsig --dial-mode=block --debug-l1=1 --debug-l2=1 --debug-l3=1 --debug-l4=0 --base-number= --ddi-length=3333333333'
    Jul 26 17:44:23 OMG800773 callp: mux_jobcontrol:1 (1) Set bchan_param ''
    Jul 26 17:44:23 OMG800773 callp: mux_jobcontrol:1 (1) Set calling_party_number ''
    Jul 26 17:44:23 OMG800773 callp: mux_jobcontrol:1 (1) Set log level to '1'
    Jul 26 17:44:23 OMG800773 callp: mux_jobcontrol:1 (1) command is 'p'
    Jul 26 17:44:23 OMG800773 callp: mux_jobcontrol:1 (1) handle
    Jul 26 17:44:23 OMG800773 callp: mux_jobcontrol:1 (1) command is 'dstart'
    Jul 26 17:44:23 OMG800773 callp: mux_jobcontrol:1 (1) handle :dstart
    Jul 26 17:44:23 OMG800773 callp: mux_jobcontrol:1 (1) command is 'dev'
    Jul 26 17:44:23 OMG800773 callp: mux_jobcontrol:1 (1) handle :devicelist
    Jul 26 17:44:31 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): L2X : 2011-07-26 17:44.31,464 R:02 01 01 01
    Jul 26 17:44:31 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): L2X : 2011-07-26 17:44.31,465 T:02 01 01 01
    Jul 26 17:44:41 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): L2X : 2011-07-26 17:44.41,474 R:02 01 01 01
    Jul 26 17:44:41 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): L2X : 2011-07-26 17:44.41,474 T:02 01 01 01
    Jul 26 17:44:42 OMG800773 sshd[1249]: Accepted password for root from 192.168.21.105 port 64249 ssh2
    Jul 26 17:44:42 OMG800773 sshd[1249]: pam_unix(sshd:session): session opened for user root by (uid=0)
    Jul 26 17:44:49 OMG800773 callp: 0: callp: tlsServer:13 (tlsServer) Private key does not match the certificate public key
    Jul 26 17:44:49 OMG800773 callp: 0: callp: tlsServer:13 (tlsServer) got error
    Jul 26 17:44:51 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): L2X : 2011-07-26 17:44.51,484 R:02 01 01 01
    Jul 26 17:44:51 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): L2X : 2011-07-26 17:44.51,485 T:02 01 01 01
    Jul 26 17:45:01 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): L2X : 2011-07-26 17:45.01,494 R:02 01 01 01
    Jul 26 17:45:01 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): L2X : 2011-07-26 17:45.01,495 T:02 01 01 01
    Jul 26 17:45:11 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): L2X : 2011-07-26 17:45.11,504 R:02 01 01 01
    Jul 26 17:45:11 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): L2X : 2011-07-26 17:45.11,505 T:02 01 01 01
    Jul 26 17:45:21 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): L2X : 2011-07-26 17:45.21,514 R:02 01 01 01
    Jul 26 17:45:21 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): L2X : 2011-07-26 17:45.21,515 T:02 01 01 01
    Jul 26 17:45:31 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): L2X : 2011-07-26 17:45.31,524 R:02 01 01 01
    Jul 26 17:45:31 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): L2X : 2011-07-26 17:45.31,525 T:02 01 01 01
    Jul 26 17:45:41 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): L2X : 2011-07-26 17:45.41,534 R:02 01 01 01
    Jul 26 17:45:41 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): L2X : 2011-07-26 17:45.41,535 T:02 01 01 01
    Jul 26 17:45:51 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): L2X : 2011-07-26 17:45.51,544 R:02 01 01 01
    Jul 26 17:45:51 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): L2X : 2011-07-26 17:45.51,545 T:02 01 01 01
    Jul 26 17:46:01 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): L2X : 2011-07-26 17:46.01,554 R:02 01 01 01
    Jul 26 17:46:01 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): L2X : 2011-07-26 17:46.01,555 T:02 01 01 01
    Jul 26 17:46:04 OMG800773 callp: 75: callp: tlsServer:18 (tlsServer) Private key does not match the certificate public key
    Jul 26 17:46:04 OMG800773 callp: 75: callp: tlsServer:18 (tlsServer) got error
    Jul 26 17:46:11 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): L2X : 2011-07-26 17:46.11,564 R:02 01 01 01
    Jul 26 17:46:11 OMG800773 callp: mux_isdn:0 (1) ISDN[1](1239): L2X : 2011-07-26 17:46.11,565 T:02 01 01 01
    -----------------------------ENDE Syslog-----------------------

    Kommentar

      #3
      Habs gefunden

      Hallo zusammen,

      habe mein Problem gefunden, es lag daran, dass die Hipath automatische Amtsholung aktiv hat. Damit funktioniert die Querverbindung nicht richtig.

      Kommentar

      Vorherige template Weiter
      Lädt...
      X